1996 Chevrolet Cavalier "map sensor" Questions

...MAP sensor is plugged in Start the car idles fine for about 30 seconds then starts to sputter and has a bad odor coming out of the tail pipe. Ran a computer check and it said it was the MAP sensor. ...

looking for code 108 Code 108 Refers To Page 108 Of Your Manual It Is About Cruise Control OBD 2 Code P0108 MAP or BARO circuit voltage high . MAP sensor connection or MAP sensor has failed .

...map sensor, starter, crank sensor, oxygen sensor, fuel pump works help? 2003 cavalier cars turns over but won't start, changed plugs, coil pack, map sensor, starter, crank sensor, oxygen ...

...MAP) sensor for a 1998 Chevrolet Cavalier 2.2L engine (VIN code 4) is mounted on the side of the throttle body assembly.  It is marked "A" in the diagram below.HINT: For further identification, ...

...MAP) sensor/ barometric pressure (BARO) sensor--low input===causes wiring short to ground---map sensor--baro sensor---ECM code p 0122 refers to (1)throttle position(TP) sensor A/ pedal position (APP) ...

map sensor hose would map sensor hose collapsed make car work bad and shut off Real possible...hose is cheap...replace it!

...map sensor and find that there is no power in the plugwhat do I change now? You may need a wiring diagram to make sure, but I think the gray wire is reference voltage and it also powers the throttle ...

...MAP sensor located on a 2004 Chevy Cavalier 2.2 ecotec dohc? Need to find out where the MAP sensor located on a 2004 Chevy Cavalier 2.2 ecotec dohc On your intake manifold, #3 in diagram. My info ...

...map sensor. It requires a scan tool, though. Dying when you open the throttle indicates the map or the tps. If it starts hard and idles rough, the problem may be a vacuum leak or possibly slipped ...

...my 98 cavalier. map/baro circuit low input. do I change the map sensor or is there something else I should do? try first to clean the carbon clog on map sensor port, and the air ducking in trothle ...