1996 Chevrolet Cavalier "frame repair" Questions

frame then over to the rack. this is a relatively inexpensive repair, but requires a hoist, as you need to slightly lower the front frame to change the line. the part is worth aprox. $170 (CDN) and it

Car was hit on front passenger side. A frame bent Car was hit on front passenger side. A frame bent axle broken. Is it worth repairing. Car ran great If the engine cradle is bent or the sub frame, I'd

of a home repair as the front frame needs to be dropped down slightly to gain access to change the line. the line costs aprox. $150 CDN and i believe about 1.5 - 2 hours shop time for labor. good luck

...DO NOT remove the fuel tank. It is much easier to remove the eight bolts that secure the bed to the frame, lift the drivers side of the bed and place a jack stand between the frame and bed. This ...

...bent rim --,bent and or broken hub,-- spindle bent or broken,shock,strut bent,broken--unibody [frame]bent ---u will have to remove wheel and look at the parts and see which is damaged also open ...

...frame, still nothing. The bulb works when plugged into the left side, so it`s good. Any ideas? carsami, thanks get the service and repair manual from the given link and get the solution easily ...

...frame. If the wires appear to be o.k., then check the fan motor to see if it is bad. Try spinning the fan blade manually and if it makes noise or won't spin, replace the motor. Once you ...

...repair with no parts involved, first off the shift interlock has nothing to do with it and will not prevent your vehicle from going into park, it is designed to work ONLY when coming out of park. The ...

repair the radiator, where are the bolts that hold it in place at?.. the cooling fan is not attached to the radiator. it is mounted on it's own frame attached on the sides with about four bolts.remove

i was told i have a crack in my subframe and i want to know if that can be purchased separatey and what is the actually name of the part It is called a sub frame and it can be purchased separately ...