1996 Chevrolet C1500 "distributor leads mixed" Questions

...older non computer engines but cant determine the cause of the misfire on this one. Could this be a distributor cap or plug wires like on an older car. I dont find any carbon tracks or cracks in the ...

...leads, Distributor cap, rotor for T100 Is there any special consideration in replacing the distributor cap, spark plug wires and rotor on a 1993 Toyota T-100 Pickup? Or is it just plug, place and ...

...application catalogue for that brand. The gap is generally listed alongside the vehicle listing. Most common reason for no start after changing a distributor cap is getting the ht leads mixed

...spark moves to a different plug. the tach pulse that drives the ignition module is generated by the ...

ignition coil wiring wiring 0n coil mixed up want to reconnect Live wire + (15) terminal and wire from points to - (1) terminal. HT lead to distributor center connection.

leads what order do they go in. You did not specify which engine your Vitara has, the 4 or 6 cylinder, so here are both layouts. For front of vehicle, read ' side of engine where pulleys are'.

...is not operating as it should.timing is out ....either a timing belt or distributor is going bad, or plug wires are not in proper order. sounds like you have some leads mixed up cjeck firing ...

...distributor to your spark plug. There is one cable for each cylinder/spark plug. Don't mix them up if pulling them all off (draw a number with permanent marker on each lead if you desire). Most leads ...

...leads, you mixed them all up. Also make sure the rotor in the distributor is properly located. Here is your firing order. More if you click on the Images tab. ...

...are the spark plugs located? I can only locate 4 of 8. A photo would be awesome! why not just follow the ht leads back from the distributor.do one at a time,that way you wont mix up the