1996 Chevrolet C1500 "5 fuel injector" Questions

...5 CYLINDER IS MISFIRING. I PUT IN NEW PLUGS (E3), WIRES, CAP, ROTOR AND ADJUSTED THE CAM ****** TO 0. COULD IT BE THE INJECTOR SINCE THE PLUG GETS FOULED UP WITH CARBON? could be the fuel injector if ...

...fuel injectors firing on all cylinders? I believe this truck has a set of plastic set of injector lines under the intake. When they get some miles the EGR tube thats under the intake blows hot air ...

Where is the fuel pressure regulator on a Chevy 1500 v6 5 speed On the top of the engine in the fuel supply rail to the fuel injectors.

...5-7-2 If that is correct, it is highly likely that you either have a vacuum leak at that intake port, or that injector is plugged or not firing. Unfortunately it is difficult to get at the injectors ...

...5 seconds after spraying carb cleaner in throttlebody I checked the fuel pressure the first time and it stayed around 62psi after I changed the fuel pressure regulator. But it would not run. I have ...

...fuel pump on it to get it running . It doesn't want to start and when it does it asts like it is flooding for about 1 minite then runs fine.. If you turn it off for 5 minites it starts flodding all ...

...it. If no fuel in it hook a fuel pressure gauge to fuel rail then start motor look at reading on gauge then pull vacuum hose off of the regulator if the reading does'nt jump 5-10 psi its

fuel pressure was half of what it should have been. 5 psi may show a good spray pattern, but, it won't start and run a v8. In my opinion. Any applicable trouble codes? Your obd1, you should be able to

...5 sparks i changed the wire set and have the same problem. the truck starts and idels fine but try to accelerate and the engine shakes and misfires badly. These have a real problem with the ...

...5 or15 min it acts like its flooded Have you had any issues with your oil level raising? You could have an injector sticking open slightly letting the residual fuel pressure that is in the line bleed ...