1996 Chevrolet Blazer "starter wires" Questions

Ad

...wires and the fusible links at the starter should be checked, and you will know a bad fusible link wire when you find one, because they will stretch like a rubber-band, and repair any fusible link ...

Ad

Question about Chevrolet Blazer

1 Answer

...wires to starter and the locations of the other connections. I have the wire from the large post on starter to battery, but am missing the other wire to large post on starter. where does this wire ...

Ad

Question about Chevrolet Blazer

2 Answers

...starter and get at the wires while it hangs!! Try undoing those wires from the wheel well wall and then drop the starter! but of course do disconnect the positive wire from the battery! also you may ...

Question about Chevrolet Blazer

1 Answer

...starter wires below the dash. Then it sat for a year, and it wont start, after i replaced the battery. Look closely at the wiring on the starter. It sounds like you may have reversed the two smaller ...

Question about Chevrolet Blazer

2 Answers

...wires is broken my advice is get a meter to check power is going to the starter,is the power going to the main live from the battery.is the earth/netural from the battery to the connection to starter ...

wires to check power incoming power on no responce from ignition.( power @starter,power@alternater) ignition switch may be worn or a loose exciter wire [to starter] thats the small terminal on starter

...wires from the battery goes to the starter, the other goes to the alternator. Follow the one that goes to the starter. Check for damage or loose connections. Be careful when you are at the starter. ...

Question about Chevrolet Blazer

2 Answers

...starter wires are connected. May be one loose. Mia, if you need anything, please let me know. I am here to help. Thanks for choosing FixYa. If the you hear a clicking noise when starting it usually ...

Question about Chevrolet Blazer

1 Answer

...The most probable cause is a shorted solenoid. This is where the wires to the starter connect. Make sure that te wires from the battery do not touch the ignition switch wire. Thanks; Rich RPM ...

Replacing starter. I got the two bolts out but why can't I get the wire bolts out? Is the bolt just spinning not allowing the nut to come off? In that case remove the starter with the wire attached. ...

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

2,287 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...