1996 Chevrolet Blazer "stalls idle" Questions

...controls the idle. If so you will see or hear idle go up and down some and can definitely lead to ...

stalls, low idle) like yours. To correct this problem get a can of throttle valve cleaner (it is made by CRC) from the local auto parts store, spray it into the air intake of the engine until you have

...stalls when i come to a light idle sensor is bad, or you have a vacuum leak I would start by checking your IAC motor ( idle air control ) that is what ,maintence the idle speed of the engine, IAC ...

...idle in park. When stalls and sputters when you drive it. It is throwing codes for low tps voltage at idle and low mapps voltage at idle. The other code is high mapps voltage at ignition on. I have ...

...idle and stalls 1993 blazer s-10 with vortec cpi engine runs fine till engine warms up then it idles erratic and stalls out. Getting a code 33. Could a faulty MAP sensor cause this? Check the tps ...

...idle often stalls, runs ok engine misses bad at idle often stalls, runs ok at speed though. Checked codes from ecm gave us code 12. Don't have a book yet so we don't know what code 12 is....94 s-10 ...

stalls one out of every ten starts One out of every ten starts or so when starting it will stall or idle very low and I have to give it gas to keep it running. After a few minutes it runs fine. I just

3 vortec blazer runs mint for the first 5 mins then when i pull up to a red light my truck idle it just stalls and doesnt wanna run after that IAC(Idle air control) and or TPS(throttle position sensor

...Stalls at idle I have a 1994 Chevy blazer 5.7 4x4 a few days ago I had the fuel filter changed because the engine was starved fuel. It has been running fine until today the acceleration is almost ...

I have a 95 S10 Blazer- vehicle code W (DI). The car starts fine but immediately wants to stall. If you press the accelerator you can keep it running and it runs down the road just fine until you slow