...replacing lower ball joints on a 96 4x4 blazer. They are riveted into the lower control arm. You can chisel them out OR...if u have air tools...u can grind the rivets off, them punch them thru the ...
...upper ball joint from the steering knuckle using a ball joint separator tool.Remove the self-locking nuts from the upper arm anchor bolts. Remove the upper arm from the vehicle.Do not disassemble the ...
...will need a balljoint press and a hub nut socket then you just have to remove the lockout and hub to pull out the axle to get to the ball joint and you alway replace upper and lower at the same
...ball joint out of steering swivel member using puller tool or equivalent, installed on spring link. Remove nut and discard. This self-locking nut must not be reused. Remove three upper mounting nuts ...
upper ball joint and remove the castle nut. Use a ball joint fork if it wont separate from beating upwards with White rubber mallet. Once that's apart, just remove the loosened nuts on the side of the
...UPPER BALL JOINT IS THIS IS WHATS HAPPENING THERE ON BOTH SIDES AND SORT OF LOOK LIKE BIG TRIANGLES WITH A SLICED CUT IN THE MIDDLE SO THEY DRAPE OVER THE BALL JOINT AND YOU WILL SEE LITTLE PUSH CLIP ...
2,287 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,503 Questions
982 Questions