1996 Chevrolet Blazer "rear bumper" Questions

Ad

Question about Chevrolet Blazer

2 Answers

...rear bumper 1999 blazer Hi there:Check this Removal Procedure...1. Remove the rear bumper step pads. 2. Remove the license plate lamps. 3. Remove the nuts and the bolts that retain the rear bumper ...

Ad

Question about Chevrolet Blazer

1 Answer

...lamp's retainer from the rear bumper by pulling the lamp up and tilting the bottom of the lamp away from the bumper. Remove the lamp from the rear bumper by rotating it clockwise or ...

Ad

...bumper on a 2000 Blazer Front or rear, I am guessing it is the rear as they tend to get the most abuse and or rust! Start by removing the plastic step guard on the top of the bumper (use a flat ply ...

Question about Chevrolet Blazer

1 Answer

...rear bumper, rotate the bulb holder counterclockwise, then withdraw the holder from the housing and pull the bulb out. In some instances, the license light housing is held to the bumper with clips, ...

Question about Chevrolet Blazer

1 Answer

...rear bumper extension on a 2003 Chevy Blazer mines is cracked brought a new one and don't know how to put it on.... Sorry, i searched all over the web.. didn't found a thing... but try to go to a ...

Question about Chevrolet Blazer

1 Answer

...rear bumper assembly able to be replaced or is it a single piece frame. Just in case it is twisted. the blazer bumper is made up of about 6-10 parts including the brackets. it can be purchase by each ...

...stored? ITS IN THE REAR UNDER THE TRUCK YOUNEED THE LUG WRENCH TO GET IT DOWN THERE IS A HOLE UNDER REAR BUMPER WITH A SLOT PUT THE END OF LUG IN IT AND TURN IT THE TIRE WILL COME RIGHT DOWN I HAVE ...

Question about Chevrolet Blazer

2 Answers

rear side of the engine next to the oil pan. You will have to crawl under to see it. I found out the oil filter is located under a splash cover right behind the bumper,It says "oil filter access panel

Question about Chevrolet Blazer

1 Answer

...rear bumper want 2 put 2" ball on to haul a trailer? Bumper hitch ... probably 1500 #. It should be stamped in the bumper. If you want more, get a frame mounted class 2 hitch if you have a ...

...problems, thank you.Don Take a good look at the rear bumper area and wiring around it. There are recorded cases the bumper bracket is cutting into the fuel pump and fuel level sending

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

2,287 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...