...fuse.I would try to change the bulbs and check the sockets for corosion and if it is not the problem I would start checking the wiring going to the light.see if you get juice at the socket were the ...
Question about Suzuki Cars & Trucks
...fuse goes to the stop switch and if stopping (foot brake) the output goes to 12vdc and all lamps on rear (stop)glow. its cave man simple (unlike new cars that computers do all that) now my advice, ...
...third brake light works. the bulbs are good and fuses are all good The power goes from the brake light switch to the turn signal switch then to the lights. The third brake light circuit bypasses the ...
Question about Chevrolet Blazer
goes on fully, but the two main brake lights don't come on. I tried looking at the fuses, but can't tell which one is for the brake lights. Ideas? this does not sound like a fuse problem. seems like a
Question about Chevrolet Blazer
...fuse has power if the hazards work. The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch. Do you have power going into the turn signal ...
...goes straight to the switch from the fuse and doesnt go anywhere elese. the other wire if hot should light the lights. Most of these wont come out of park without this working as the wire also turns ...
...fuse and my cruise quit working. I replaced the multi-function switch located inside the steering column - all wiring goes through this switch. Well, this fixed my brake light problem only - still ...
...fuse as well as the connections for the lights under the rear bumper. All seems fine and the lights do work. Please Help!! This is because your brake light switch has gone out. There are two sides to ...
...third brake light goes on. And seeing as I am having a problem with signals.....GM says I have to replace the switch in the steerg colume. Its a little box about the size of a cigarette pack. If you ...
lost. If voltage goes into the third light but no voltage at socket it gives you some info on where to look. I had one which had a circuit board which the light plugged into. I had to change the board
2,287 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,503 Questions
982 Questions