1996 Chevrolet Blazer "chevy cavalier oil problems" Questions

Chevy Cavalier with a 127,000 miles on it on two successive trips a couple hours apart. I actually thought the problem was the belt tensioner vibrating onto the pulley above it, but replacement proved

My oil pressure sensor started leaking oil through the plug. is this a common problem? pretty common same thing with my 2001 2 door chevy cavalier. its the valve cover gasket, you need to replace it.

chevy cavalier has just started knocking right under the vavle cover. i thought that it was cause of lack of oil but that is not the case. does anyone have any idea of what the problem is? if i sounds

...Chevy Cavalier is severely leaking oil from a bolthole on the bottom of the oil pan. It is not the oil plug hole and there are a few holes like it without bolts in them but there is only one leaking. ...

...Chevy Cavalier V6 3.1 engine - leaking oil problem. every 2 months I am replacing the oil because it leaks it is probably the o-ring in your oil pump. I have the exact problem in my Cavalier. it is a ...

...good idea to have the heads resurfaced. (recommended) i have a problem chevy cavalier 1992 2.2liter and oil pan between there was a leaking antfreeze so please help me i dont even know wat wrong w ...

2003 chevy cavalier has oil leak above starter have had a new rear seal put in but that was not the problem Check your valve covers gasket valve cover gaskets are above starter

2001 Chevy cavalier oil light comes on it slightly over heats an after driving awhile coming too a stop it dims dashboard lights real low an stalls the engine what is the problem? it is an 01 cavalier

...chevy cavalier I have a 1996 chevy cavalier 2.2 4c I take care of my car did alot of work. problem started check light with both O2 sensors. check light then came on with bad cat. My gas pedal feels ...

chevy cavalier has a knocking sound and wont go over 15 mph up a hill oil and ****** fluid are good i just replaced the O2 sensor and checked the exhaust system from manifold till end converter is off