97 blazer hazards, turn signals and tail lights work. Fuses are good no brake lights. Likely the brake switch above brake pedal is bad.
97 BLAZER BRAKE AND HAZARD LIGHTS DON'T WORK TURN SIGNALS AND TAIL LIGHTS WORK JUST NO BRAKE OR HAZARDS did you check the fuses? If so, then check the plug on the steering column....
...brake lights or hazard on 97 Blazer did you check the bulbs and the fuses with a test light? If they are ok,try pressing the brake pedal, and wiggeling the 4-way flasher button at the same time....if ...
97 blazer can you tell me why my blazer shut off at a light and the brakes are hard there is a hissing sound Power Brake Booster is bad and will need to be replaced. The diaphram leaks when you push ...
brake and put your hand on the gear shift and release the button to put it in gear it will not release....will not come out of park.....help the trans receives a signal from a censer that tells it you
...97 chevy blazer ls My 98 was on the driver side just to left of the brake booster. I used a light an looked under the dash for a peice of plastic cut-out in a circle an i used a razor blade to cut ...
Question about Chevrolet Blazer
lights when you turn the key to the acc position. It cranks but will not start. can anyone help me. we have changed the ignition but it could be a bad one. Check the fuses. Some transmissions will not
97 chevy s10 where do i wire in brake light switch? its onto of the brake pedal just above the cover. un screw the old one
...brake lights dont work and also the hazard,but the parking lights and turn signals work fine.when you push the pedal you hear a noise down there Hi, Sounds like you have a short in wiring, also check ...
...brake lights work but stop working when the head/side lights are switched on. All bulbs ok. I'm led to believe it might be the multifunction switch on the steering column? Any help would be really ...
2,287 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,503 Questions
982 Questions