1995 Chevrolet S-10 CA Edition "replacing hood release cable" Questions

hood release cable is frozen, how to unlatch hood? hood release cable is frozen, how to unlatch the hood without it? if you can get a pry bar or a screwdiver under the hood and push on the mechanism ...

hood release cable Chevy S10 truck I have a 1992 Chevy S-10 pickup. The cable is no longer connected to the hood release lever. A 'friend' pulled the cable out. How do I replace the cable and how do I

hood release cable pulled off, how to reatach? pulled the hood relaease in the cab and the cable just kept pulling it has broke and needs to be replaced you can useually reach underneath the car in ...

...can gain access to the bottom side of the hood latch with a screw driver to pop it open. When replacing the release cable, be sure to grease the wear points at the latch and where the cable

...cable from the vacuum heater control valve to the heater core. This hose should be warm; if not the heater control valve is stuck and needs to be replaced. After the repair has been made refill the ...

...hood release is broken how do I get my hood open IF HOOD LATCH RELEASE CABLE BROKE AT RELEASE HANDLE YOU CAN TAKE A PAIR NEEDLE NOSE PLIERS PULL THE CABLE ENOUGH TO OPEN HOOD SO YOU CAN REPLACE ...

...hood release cable how to open hood The hood release cable is broken. How to open hood to replace cable? you can often release the hood latch from under the car, or through the grille, by reaching up ...

...release the hood. How can I release the hood to.open? The lever is hooked up to a cable, take pliers when the lever is out and pull the cable out more until the hood releases 1. peek into the crack ...

...hood release cable but first need to open the hood without a hood release lever. Any suggestions? Also may need to adjust the hood mechanism because the hood is so hard to release. Hi!! Grab the ...

Hood Release Cable How to replace? Unclip at latch and clear it to firewall Then go in truck and take off panel for hood release and un screw hood release and pull cable through. MAYBE PUSH CABLE ...