1995 Chevrolet S-10 CA Edition "remove door" Questions

Ad

Question about Chevrolet S 10

1 Answer

...remove the inside door panel to change the outside door handle...remember to raise the window to allow more access...the door handle bolts on the inside are 10 mm...To remove the inside door ...

Ad

Question about Chevrolet S 10

1 Answer

...remove the door, get some help! it will take 2 of you to get the door off and a floor jack helps a lot. you can get a tool called a pin popper and i recomend you do it makes the job much eazer, and ...

Ad

Question about Chevrolet S 10

1 Answer

...remove door stay disconnect battery and any electical wire harnesses to door , speaker wires and power doorlocks and mirriors are all in same flex conduit of door. Roll window glass down to protect ...

...Remove the door trim panel. Disconnect the negative battery cable. Remove the armrest bracket-to-door screws and the bracket. Remove the water deflector from the door. The water deflector is secured ...

Question about Chevrolet S 10

1 Answer

remove door panel also, seat belt retractor in same door doesn't work well, sometimes not at all. the scews are in the door jam to remove panel we have a 2000 chevy s-10 and thats were they are in the

remove door hinges on 1997 chevy s10? i need to remove and replace the top and bottom door hinges on both sides. I don't know how they are attached at the body. its probably the door hinge pins. use a

Question about Chevrolet S 10

1 Answer

door pannal removal chev s-10 get a door panel removal tool. easy to use just pry off the door panel, before doing that look for any screws on the panel, most are near/under the door handle.

Question about Chevrolet S 10

1 Answer

...you need to remove the door trim. Remove linkage attached to latch. Usually the latch will be secured with 3-4 large phillips or torx screws. Remove old latch and reverse procedure to install new ...

remove the door panel on 95 Chevy s10 pickup...I have removed the 2 screws in the door grip, the screw behind the door handle, pryed the top, sides and bottom....it won't budge..appears door handle in

door handle. remove any other screws you find around the edge of the door panel. if you do not have the tool. use a medium flat blade screw driver . slide it up from the bottom edge of the door panel,

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

408 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...