pass key fault light blinking and my car won't started in my 95 chevy caprise does that mean its something wrong with the key? did you get a new key made without the chip? The car will not run without
Question about Chevrolet Monte Carlo
chip reader, inside of the lock cylinder to the main harness at the base of the column, breaking. You can either replace the lock cylinder and have the new one re-pinned to your factory key, or bypass
failed, or the sensor in the lock cylinder. You can try a spare key to knock that off the list of possible causes. Until the PASS module sees the right chip in the key, the car will not crank or start
Question about Cars & Trucks
...pass security settings The key should have a chip in it and you will no choice but to get a new key. The only way around this is you have to replace the lock and key tumbler that does Not require a ...
...pass key fault replaced cylinder and key and light still will not go away it might be the chip in the key or the wires coming from the ignition going undr the dash an if u have a aftermarket alarm ...
Question about Chevrolet Monte Carlo
...pass key code was on all day then finally the van shut down and wouldnt start anymore now i cant the fuel pump to come on i ran my own jumper wire and the pump came on but the van still wont start im ...
Question about Chevrolet Monte Carlo
...inside is not enough. look at your key if the pellet can be seen imbedded on the shank it is pass-key. If the head of the key is large and rounded with no sign of a chip on the shank it is
Does a98 chevy cavalier have a security box If you mean security system, the answer is yes. It is a passive system called pass lock. It has a special chip built into the key.
...with the chip in the key or the connections within the ignition its self. Both are common but a Pass Lock Relearn as described above will usually adapt to the poor connection values. Hope this
Question about Chevrolet Monte Carlo
...Pass lock system with the chip in the key. Have the chevy dealer service department check the key for resistance. You cannot use a "copy" key cut at the hardware store. If you get a replacement key ...
503 questions posted
Usually answered in minutes!
605 Questions
554 Questions
577 Questions
528 Questions
428 Questions