1995 Chevrolet Lumina "window motor" Questions

...hard time accessing the window motor and gear. Any diagrams or instructions Chevy cheeped out and has been using aluminum rivots to hold the motor in place. to remove the motor remove the

...- if you unplug motor and checked voltage when window switch is pushed this will let you know if it's the motor or switch - no voltage - switch bad voltage +12 volts or -12 volts - motor /clutch ...

window motor? window switch is easy. all you have to do is remove door panel and disconnect the connector from the switch and pop it out of the panel and install the new one. window motor, you have to

...window motor on a 1997 lumina Window Regulators and Motors - REMOVAL & INSTALLATION NOTE Some window regulators are retained at least in part, by heavy-duty pull rivets. To remove these rivets, ...

...window motor located inside the door.. if it doesnt make ANY noise when you hit the switch to roll it up, then it is either the switch or the window motor.. if it DOES make a noise inside the door ...

...the up button-hit the inside of the door about in the middle-this may break the motor lose and you may get it to go up atleast until you can get a window regulator motor to replace it - cheers ...

window motor due to the factory one failing, The person before me cut all the wires going to the motor and toggle switch in their attempts to fix / replace the motor, The new motor does work but I had

driver power window won't roll down or up Assuming there is no noise like a motor running I'd say the power window motor has gone out and needs replaced.

you would have to remove the door panel and disconnect the window from the track and then wedge it up, sounds like a bad motor or switch,once you have the panel off you can test for power at the motor

...window quick working How do you replace the motor in door? how to remove door panel? Remove the arm rest on the door which has screws in it and then unplug the window switch to the window. Then you ...