1995 Chevrolet Lumina "engine makes loud grinding noise" Questions

makes a loud (grinding type noise). What can I or do I need to do next? Thank you in advance, Scott top up fluid & turn wheels all the way one way & then the other, until all air is bled out. May need

loud grinding noise within the engine and stalling after braking hard My eagle Vison Will start up fine but when it starts theres a sudden loud really obnoxious twanging like grinding within the ...

...engine makes a very loud, high pitched grinding sound. Its hard to explain. After a few (2-4) minutes it will rev back down and be just fine. just recently, My service light came on and now my check ...

Loud rubbing noise? Brake problems? Clanging noise is bad engine problem. Was oil that low that they needed to add it. Have you checked it again since that? Do so immediately, If low, take it back NOW

makes a loud noise in the engine when started and gets worse when accelerating. It also feels as if the car if being forced to go. What can cause this? Hi, Please check you engine oil as a first start

...engine makes grinding noise battery is okay, fluids are okay. fuses are okay starter okay gas pressure and gas filter are okay car will sometimes turn on for a few seconds but makes a loud grinding ...

makes a funny sound and wont start it sounds like something is not catching Good indication of a bad starter. Is it just clicking or is it a grinding ugly noise?. The second is definately the starter.

engine, that I've not been able to track down where it's coming from. It's loud enough to be heard outside of the vehicle, but it only makes the noise when I'm driving it. I've taken this Mercury 1994

...loud grinding noise occurred, vehicle will not move while engine running. Possible drive axle came apart, jack up front end with safety stands, pull wheel off and inspect drive axle and related ...

...engine. I changed the bearings in one of the pulleys, I checked the crank damper/pulley, there was no play in it. After I changed the bearings in one of the pulleys, I left off the belt, no noise, ...