1994 Chevrolet S-10 Blazer "transfer case locked neutral" Questions

Ad

...Transfer Case in Neutral position. Shifting into NEUTRAL To shift the transfer case to NEUTRAL do the following: Make sure the vehicle is parked so that it will not roll. Set the parking brake. Start ...

Ad

Question about Chevrolet Blazer

1 Answer

...transfer case control module supplies a regulated 8 volt DC to the switch through circuit 431. The switch has circuit 1693 to return current to the automatic transfer case control module through a ...

Ad

Question about Chevrolet Blazer

1 Answer

...transfer case motor or the module itself. let me know anything if you can. what you are most likely feeling is in 4lo the transfer case drops the gear ratio and 4hi just locks the front differential ...

transfer case, check the cable connected to it. this cable is connected to the vacuum control pump deal that controls you cruise control. this pump is located directly under the battery box. the plate

...transfer case. You should hear it work from 2wd, 4hi to 4low and back to 2wd with the push of the switch. if you don't hear it working then check the wire harness at the actuator motor, look for any ...

Question about Chevrolet Blazer

1 Answer

...transfer case shift control module ? If no codes ,check B+ power and grounds for the control module . Find a wiring diagram so you know which wires are what etc.....Videos on youtube on basic ...

Question about Chevrolet Blazer

1 Answer

...transfer case also check fluid condition also check for metal in fluids if you stick finger or paper towel in and if you see metal you will know where your noise is coming from more info. does it ...

...transfer case to shift torque split and gear reductions for 4lo.SOMETIMES, these modules will suffer from "logic lock". Make sure that if you have a factory radio installed, you have manually copied ...

transfer case in N (neutral) and the vehicle will not engage to drive or reverse. Does placing it in neutral put the entire drive in neutral. Does placing it in neutral put the entire drive in neutral

...transfer case is not engaged. This is most likely because either the hubs are not locked or the transfer case is in neutral. This is a good thing if your transfer case is in 2 wheel drive. With ...

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

1,360 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...