1994 Chevrolet S-10 Blazer "brake pads" Questions

Ad

...brake pads. what do i need to do to get the caliper to go back in so i can put it on over the brake pads again? you can loosen the bleeder valve and then use a C clamp to press it back in and then ...

Ad

Question about Chevrolet Blazer

1 Answer

...brake pads are thin you may be hearing the squealer ( a wear indicator built into the disc brake pad. When the pads are thin the squealer can contact the rotor reminding you to have the brakes ...

Ad

...brake pads are equipped with a small warning device. This is simply a small tab that as the pads ware down it comes in contact with the brake rotor (making an obnoxious squealing sound), letting you ...

why are the brakes getting hot after replacing rear brakes Brake Work was not performed correctly new brake pads will cause burn smell until new brakes shoes pads break in.

Question about Chevrolet Blazer

2 Answers

...brake pads seem to be sticking..are the calipers shot or do I need hoses or both? Well when you looked at the brake pads after your drive were the pads stuck to the rotor? First thing to do is double ...

Question about Chevrolet Blazer

1 Answer

...braking I changed the brake pads, when i finished i start the engine and try to brake the pedal has not pressure. Sounds like you need to bleed the brakes. Did you do that after installing the

Question about Chevrolet Blazer

1 Answer

...brake pads and now the brakes wont release. When you replaced the pads did you make sure the calipers were working properly?, did you bleed the brake lines?, is emergency brake cable completely ...

brake pads put on front as usual.compress calipers new pads all good. when I went to drive pedal(brakes) was intemittenly slipping and sometimes going down too far.Nothing really had been changed but ...

Question about Chevrolet Blazer

1 Answer

...pads with the shims on again? Bleed brakes again? bleed the brake again. if the pedal goes to the floor with little resistance, then the master cylinder is your problem. the shim is to depress the ...

Question about Chevrolet Blazer

2 Answers

...Brake Pads and Rotor. After replacing and a test drive... Its making a scrapeing noise and now the rotor is extreamly hot and descolored. took it apart and found alot of presure on pads.. Help! I ...

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

1,360 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...