1994 Chevrolet K2500 "clean silverado egr" Questions

...silverado k2500 has high idle issues and also surges while in park. (can go 35mph without stepping on gas pedal) If your idle is going from 500rpms to 1000rpm's fluctuating at and idle your EGR valve ...

clean it or replace it? The 2006 Silverado doesn't have EGR. They did away with it in '03 I believe. The 2006 silverado does have an EGR valve. I took mine to the shop and that's what is wrong with it

...Silverado I took my truck into the shop and they told me the EGR valve needed to be replaced but that it would cost $700 to fix the problem. They stated that not only do you have to replace the EGR ...

...egr valve located on a 1999 silverado 5.3 vortec i think the egr valve needs cleaning on my truck i would like to find where its located try cleaning the inside of the MAF sensor with CRC brand MAF ...

...silverado 5.3L 1500 very slight hesitation on take off giving EGR CODE p1406 I cleaned and tested still getting code and hesitation Hi, egr valves don't always clean properly if they where badly ...

...silverado is warm gradually getting worse over the last year. its been idleing at about 1200rpms for about 3 days now. gonna try cleaning the egr valve and the connection tube below it, the service ...

...this happens at idle you will have a rough idle, you can take out the EGR and clean out any debris in there that causes the pintle to remain open,or the EGR just doesnt close properly due to being ...

...EGR Valve? Because a slightly open EGR valve will cause a 02 code to appear. Either way clean out the EGR or replace, as for the 02 you will have more trouble testing it when you can rather replace ...

...silverado check PVC and EGR valves . Yep, check those. Also check all the vacuum hoses for leaks. after that I would clean the throttle body and mass air flow sensor(MAF). Use a tooth brush on the ...

...silverado 8.1 when get hot bucks and pops through intake and looses power give it gas and just bogs down Check EGR valve it may be sticking remove and clean, also replace PCV valve if not done ...