1994 Chevrolet C1500 "chevy truck 4 heads" Questions

4.3 tbi on a 94 chevy silverado Cylinder head bolt torque specs: Step1 25ft lb Step2 45ft lb Step3 65ft lb ------------------------------------------ ! 8 5 9 ! ! ! ! 12 4 1 13 ! !_____________________

...chevy 2500 pu cylinder head torque spec is step 1, 25 ft-lb step 2, 45 ft-lb step 3, 65 ft-lb bolt tightening pattern front of vehicle is on left just for referance. 13 5 2 10 17 9 1 6 14 16 12 8 4 3 ...

...Chevy 1 ton truck with the 350 motor. I have had so many problems with the throttle body, wanting to change it carb. What all is involved with doing this. I am not willing or have the money to buy a ...

...chevy tahoe 5.7 liter 4 wheel drive start in the middle and work your way out ,do three passes ,first one with speed key then ratchet then with a nice shiney snap on knuckle bar .making sure the bolt ...

chevy c1500 with light issues. Left turn signal works fine, right side blinks like 4 ways,along with license plate light.when head lights are on nothing for right side turn signals. Hazards everything

...chevy 4 x 4 truck he has bled the brakes changed the booster and mc our machanic and him are scratching there heads on why the pedal is still spongy . today he is going to change the porportioning ...

...chevy 350. mine had tbi, and the new motor had a 850 4 barrel so i stripped it down to the block and heads to keep my tbi. i changed over all sensors. i now have 150 psi of compression, i have good ...

Chevy Blazer 5.7L v-8. Had lots of valve noise but ran good. Took the valve covers off to check the rockers and they were all loose so I decided to adjust all the rockers according to an online manual

...when i keep the starter ingaged, also not charging. new alt batt and starter. 1984 chevy 3/4 ton Replace the ignition switch,it only has aux.out put power in start position,not in the run

...chevy 3500 runs really bad! I put a tune up in my truck and now it runs really bad, it has no guts up hills, and most of the time runs OK under 50 mph. I have been trying to trouble shoot it but ...