1994 Chevrolet Astro "siezed bolt" Questions

...siezed up.......I'm trying to remove the bolt holding the pulley in place but I may have stripped it because the bolt is relatively loose but will not come out. The pulley bolt turns RIGHT to loosen ...

Air conditioning idler pulley siezed I have a 2000 GMC sierra with a 4.8 V-8. The air conditioning idler pulley is siezed. How the heck do you change the pulley?!!! There are 2 bolts that hold the ...

siezed exhaust manifold bolts 1969 Ford F150 Pickup has siezed exhaust manifold bolts on underneath side. Have tried spraying different kinds of lubricants to loosen them. Nothing works. Bolts are ...

changing the alternator belt where is the tension adjustment on drivers side of egine under alt(15mm wrench head bolt in center or pulley with 13mm adjuster bolt)may have to lube tesioner bolt as they

...REPLACE FILLING AND DRAINING BOLTS WITH NEW ONE. In rare cases a rusty bolt is siezed, almost rust welded in the transmission housing, so the transmission must be removed and taken to a machine

...siezed idler pulley, tensioner pulley, or ancilliary device (alternator, PAS pump, aircon compressor, etc), a weak tensioner spring on the auto tensioner, or the belt is running out of true. Or There ...

2000 honda civic sir 1.6 dual cam vtec head torque and head bolt location The Head bolts are located below the cams, so you have to take the cams out to get to the bolts. The torque specs for the head

...screw on the face of the rotor remove this and beat the rotor off with a hammer as they are usualy ...

...the underside by removing the lower plastic bumper cover, the torx screws will be more than likley siezed, you then have access to the rad fan unit.i think you can just about remove the fan unit ...

Remove transmission on a 1998 Dodge Caravan with a siezed motor Will I be able to separate the motor from the torque converter/tranmission if the engine is siezed on the vehicle and will not turn over