...ENGINE BRIEFLY TO SEE IF NOISE IS STILL THERE. IF NOISE IS NOT PRESENT CHECK ALL BELT DRIVEN COMPONENTS FOR LOOSE BEARINGS OR EXCESSIVE MOVEMENT. IF NOISE IS STILL THERE THEN PULL DUST SHIELD UNDER ...
...noise on takeoff or when shifting gears is usually an engine or transmission mount. With the vehicle placed in Drive and foot on the brake, lightly tapping the accelerator pedal should cause the ...
Question about Chevrolet Astro
noise by front driver's side wheel well or engine area when Gas Pedal is RELEASED...Help? 2009 KIA Sportage 45000 kms - Knocking noise by front driver's side wheel well or engine area when
Question about Chevrolet Astro
noise in the engine area when gas pedal is depressed. It's a quiet whine but annoying. The belts have been checked and an overall inspection during the last se 2007 Ridgeline makes a light whining
Question about Chevrolet Astro
...is pressed, a throbbing noise by engine area occurs. Why is this happening? What needs to be fixed? may have a loose vacuum line,look around and see if anyhing is out of place and follow the
Question about Cars & Trucks
engine area only when car is moving and FOOT TAKEN OFF GAS PEDAL. No noise when parked, only when car is moving faster than 20 mph and foot off pedal and in neutral. HELP!!! thank you. Year/make/model
Question about Chevrolet Astro
...noise coming from engine possible fan or belt area? Sound goes away after the engine warms up. It also won't start sometimes unless I keep my foot on the gas pedal for a few min and while driving it ...
Question about Chevrolet Astro
loud roaring noise in engine area of 2000 excursion...no engine light on...goes away when gas pedal is pressed but comes back when released...what could be the problem ideler pully
Question about Chevrolet Astro
...noise coming from engine possible fan or belt area? Sound goes away after the engine warms up. It also won't start sometimes unless I keep my foot on the gas pedal for a few min and while driving it ...
...engine cranking and there is a hissing noise from exhaust it means there is a exhaust valve not seating properly or the valve seal is going bad. Stick in key to "on" position, right before starting ...
347 questions posted
Usually answered in minutes!
481 Questions
367 Questions
305 Questions
244 Questions
248 Questions