1993 Chevrolet S-10 Blazer "clamp wont battery post" Questions

...wont start. battery has juice but it just clicks when i start it. its a 93 blazer with a vortec 4.3. "Battery has juice" but maybe not enough. It takes 125-200 amps to start the typical engine. You ...

wont start want start problems starting idle problems. Some 4.3's have 2 Coolent temperature sensors, Some only have 1. On the engines that contain 2 sensers, One is a Temperature Senser and the other

...wont start but when you touch the battery every thing comes on. I have a 99 escort with a car starter. You have to take the battery clamps off once or twice a year and clean where they contact with a ...

wont pop open All electrical users are dependent on battery condition; the starter draws 120-200 amps of current and drops even a good battery down a volt or two. The tolerance of such niceties as the

...clamp to the negative post. i've heard that th starters they are using in the dodge cars are goine BAD. So answer this , will it try to crank or is it just cranking and not starting? 2001 dodge ...

wont turn over. whats could be my problem If the solenoid is just clicking, then your solenoid is not getting enough voltage to fully engage the bendix that goes forward and engages your starter, that

...wont start Dead battery. Try jump starting it. Then stop by any good parts store (Advance, Autozone, etc) and have them to a FREE charging system test and a FREE battery load test. I suspect your ...

...wont start what can it be I charge the battery and it drives great but once it sits for more them 4 hours it drains the battery all over I already changed the fuse and the battery and it still kills ...

wont start after I changed the positive battery clamp Give them a good clean with emery paper ,both the terminals and the inside of the clamps then a bit of vasoline on then posts and refit the clamps

clamp the black negative lead on the dead battery to a good engine piece of metal or large bolt. Start the good car and let it idle for five minutes. After this make sure that the only light on in the