1993 Chevrolet Lumina "fit sound" Questions

put head new head gaskets in now come to start it and i have spark and fuel and i have the firing order rite but it wont start it acts like its out of time??? I will get a backfire from time to time ...

...it should thread out but after turning it for some time I realized that it was most likely press fit in and now I'm not sure how to remove it Breather is pressed in and should always be ...

can someone please help me???? i keep getting code po401, insufficient egr flow. i have replaced the catalytic converter, egr valve, egr tube, and have tried running cleaner through. it sounds a ...

...provide a temporary fix using a 1 foot piece of 1" square steel tubing and 2 u-bolt brackets that fit over the broken arm (at any hardware store). Center the piece of tubing on the break inside the ...

...filter first, since it is the least costly and user friendly part to get to. My APV had disconnect fitting which you depressed tabs and released the filter from the line. Take the front (engine)

...Fit a second hand engine as yours wont be any good by now as the bearings and chrankshaft would be well worn and buggered . Does the engine turn over by hand easy And have you lost power in the last ...

...stock wiring. Sometimes you need a conversion wiring harness to whatever aftermarket radio you are fitting. Crutchfield does them. The first this to try is bench testing the radio, with power,

...damage the threads on the heads. You'll need a padded special spark plug removal tool that will fit at least a 3/8 drive ratchet wrench, and you might need a 4 inch extension for the ones in the ...

...torque. The narrow 60° angle of the V6 cylinder banks was chosen so the engine would more easily fit into front-wheel drive cars and minivans as you probably know seeing you have auto experience! ...

I've just had a new exhaust fitted to my Yaris, but it's now very very loud. Is this normal? If you have noticed the exhaust sounds loud then it is probably not fitted properly......take it back to ...