1993 Chevrolet K1500 "heat coming 1 side cab" Questions

Ad

...heat the yokes with a torch. The original joints have plastic injected into them to hold the cups in place you have to melt that out to get the joints apart. The new joints will come with snap rings ...

Ad

...1 I would like to have the wiring diagram on my truck,2 My heated seats are needing repair,just replace both heating elements in driver side seat work great for a bout 3 months,and now I push button ...

Ad

...heat. the blower relay is in the engine bay box 1 , far end marked HTR. on high the relay coil 1 and blower pin 1 are grounded the relay closes, if and only if the 10 amp heater fuse is good. the ...

...1" ) and is a purple wire. The problem seems to be water getting into the channel, and causing corrosion with the tape, which feels like hockey stick tape, not electrical tape. MAke sure to cut the ...

...1. we just watch the drive motor actuator to do that. blower is good. . heat comes from the engine so we scan the PCM for PID ECT temps readings/ 180f to 200f + any real scan tool can do this. ...

1 and 2, are 180f to 220f hot that is good test for engine bay good and the core is not clogged if hot /cold is fingered, that is clogged up core. the first question that pops to mind also is does the

Question about Chevrolet 1500

2 Answers

...coming out of the cab on the left side into the engine bay. You will have to look under the cowl over the engine and you will likely find a rotten piece of plastic vacuum line. Cut the old plastic ...

Question about Chevrolet 1500

3 Answers

...coming down from rear of engine down trans thats most likely your problem for the heating problem inside check heater control valve or blower motor if not blowing air altogether I have found that ...

heat. Unfortunatly you do have to remove the dash to access any of the blend door or fresh air door actuators here is a step by step proceedure this takes aprox 5 hrs in a shop so plan on a weekend at

Question about Chevrolet 1500

1 Answer

Heat exchanger control valve is mounted somewhere along the path of ONE of those pipes or tubes (the "input" tube). There are many threads on the Internet on this vehicle and year, and so many concern

Not finding what you are looking for?
1993 Chevrolet K1500 Logo

876 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...