1993 Chevrolet K1500 "fuse location running light" Questions

...fuse location, or what it is called in fusebox of 93 chevy halfton I know where fuse box is, can't find or determine what the rear running lights would be called in fuse box, or where in fuse box its ...

...fuse keeps blowing for om running light and the head light flicker what can i do? 1993 chevy shortbed 4x4 You have a short to ground. You need to isolate the problem circuit. Remove all of the lights ...

...2003 chevy 1500 hd do not have any power going to the break controler but its pluged in is it a fuse and not power from break lights to run it either there should be a buss fuse located in the ...

...light in dash on but no power to lights and just put new lights in and the brake is not set but cant find relay all fuses is good I would check the sockets, test the wires going into the sockets for ...

...light green wire as the sme color as the wire that hooks to the horn. The fuse is in the under dash fuse panel. if the fuse is good you can repeated ly hit the horn button and listen for or feel by ...

...running light its a 97 my truck has daytime running lights its a 97 cheyanne half ton 2 wheel drive one day they quit coming on and now only headlights work when i turn them on what causes ...

running lights. All fuse's are new. Totally confused? Turn your headlights on and use a test light to check the harness on your vehicle to make sure you are getting power through the connection. If so

...luck the running motor is probably the ABS motor, indicating a faulty ABS controller. Take the ABS fuse out to stop the motor until you repair the controller, so it won't run down your

...control module with a new one. It still does not have spark or fuel. I have checked all the fuses. I performed the electrical tests on the coil per the Haynes manual and it checks out. Coil ...

...light does not illuminate, test feed wire for continuity and the fuse in the underhood fuse relay center. Repair as necessary and repeat the test. If the fuel pump is still not functioning, connect a ...