...spark, fuel pressure, injectors have been cleaned, truck will start if fuel is poured down the TBI and then dies. Pulled injector plugs to check voltage both plugs pulse from 0 to .02 volts. Checked ...
...Control Module, Coil Packs, Crank Sensor, VSS, ECM under dash, cam sensor, map sensor.what do people think could be wrong it is getting good spark to all cylinders and it is getting good fuel. Have ...
SPARK CONTROL -.KNOCK SENSOR.LOOKS LIKE ALTERNATOR NOT PUTTING OUT ENOUGH VOLTS TO CHARGE BATTERY.YOU NEED 13.5 TO 14.5 VOLTS.CHECK ALTERNATOR FUSE AND ELECTRICAL WIRES.MAKE SURE BELTS NOT SLIPPING.IF
spark, pretty much your looking at a failed ignition control module. 8 out 10 times i'd say this is the case. now, there may also be a crankshaft position sensor on your vehicle, depnding on the split
...spark. Then fuel and compression. Testing procedures for each componet are availiable to confirm that the crank shaft position sensor and ignition control module are giving signal to fire the coil, ...
...Sensor. Fuel Pump Relay Fuel Filter EGR Valve A Couple of New Hoses Spark Plugs Spark Plug Wires Cap Rotor Full Distributor Fuel Pressure Regulator (probably wrong name for it) New Computer PLUS new ...
404 questions posted
Usually answered in minutes!
584 Questions
420 Questions
403 Questions
331 Questions
284 Questions
