1993 Chevrolet C1500 "module" Questions

...Remove the floor air outlet. If equipped with a diesel engine, remove the powertrain control module. Remove the kick panel trim. Remove the blower motor. Remove the steering column. Tilt back ...

...not start until cold what could be the problm. thank you for your help. Most likely your igintion module is the problem ... the ignition module is located inside your distributor , remove ...

...body, then the problem is either with the distributor, the ECM, or the wiring between the ignition module inside of the distributor and the ECM. There is the possibility that the ignition coil is ...

...can prevent the fuel pump from running if the OPSU is faulty. On all applications the ignition module located inside of the distributor is what generates the signal that is used by the ECM ...

...just to change the whole unit as the pins can brake if you remove the modular of it. The ignition module is in the distributor. Remove the distributor cap and rotor. You will see a black module

whats the purpose of how the ignition module works or how you know it is bad truck turns over good but wont start has spark and fuel go to engine Ignition module is controlled by the engine computer ...

Where is the transmission control module located? The TCM is part of the ECM (electronic control module) and is not a separate module. The ECM is located behind and to the right of the glove box, you ...

...lead and wiring. PICK-UP COIL To test the pick-up coil, first disconnect the white and green module leads. Set the ohmmeter on the high scale and connect it between a ground and either the ...

...C1500: Heat works on low speed, no medium, and high only works intermittantly. My HVAC control module worked on low and medium only, with high only working intermittantly. Then, the control ...

...on ether, idles fine, stalls when put in gear. new fuel pump, new fuel filter. It has to be the module in the distributor or the bolts are corroded. Just change the module and sand off where it ...