...can stick a wrench between the torque convertor an th fly wheel and remove the flywheel that way then slide it out and slide the new one in is not easy but it saves time i have done it that way ...
Question about Chevrolet Blazer
...New torque converters are balanced before they leave the factory. I think yours slipped past Quality Control. Did they replace the flex plate at the same time? Flex plates are also balanced. Maybe ...
balanced by a good transmission shop, or whether it would be more practical to just buy a new converter. The converter may be damaged as well. You can get a new converter for a little over $100.00 and
Question about Chevrolet Blazer
...torque converter replaced because of a loud whining noise. After i picked up my ford f150 (2004) i noticed a bad vibration just sitting still. I had new plugs put in, but still have vibration ( no ...
are out of balance. If recently replaced it should be a warranty issue. By your testing you have determined it's transmission related. I have seen new/rebuilt torque convertors be balanced incorrectly
...new tires themselves could not be balanced, and I ended up going through at least four more new tires from Costco before ending up with 2 more that could be balanced perfectly. There is actually a ...
Question about Chevrolet Blazer
...new tyres on front. 3 hrs later - shuddering again. On return trip home shuddering began 1/2 hr in - had to kept modifying speed to stop it for periods. Didn't happen going down hill. Steering wheel ...
...new tires, pads, rotors, harmonic balancer, all fluids are good. What I fear is a bad transmission or a leak from the catalytic converter. Other than the sound the car sounds/runs great except the ...
...torque converter (new tranny oil and seals) - new left rear axle - new u joints and carrier bearings - new motor mounts and pinion seal - new differential gears - new tranny mount - new ujoints and ...
torque converter als checke trans mount Had a vibration coming into a brand new car holden.Found when air con installed they didnt fit correct vibration would come up through instrument panel at 60 to
292 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions
