1991 Chevrolet S-10 Blazer "change oil sensor unit chevy" Questions

oil sending unit on my 1991 chevy S-10 Blazer do to faulty readings. After I let the truck idle for about 20 mins the idle sits at about 15 or 20. When Idling at a stop it some times sits at a 10 0r 5

...OIL PRESSURE SENSOR THAT IS ON THE BACK OF THE BLOCK W/A WIRE OFF OF IT TO DASH YOUR VEHICLE WILL NOT RUN W/OUT OIL PRESSURE IT WILL SHUT OFF YOU CAN GET IT AT ANY PART STORE FOR ABOUT 12 BUCKS my ...

change the oil pressure switch. After you change the switch,you should spend sometime to inspect the wiring between the fuel pump relay,ECU and fuel pump. Please post up day on the comment window/page

...oil system cleaner. The truck seemed to be running fine for the two days following, then last night it fired right up, and I was cruzin down the road and it sputtered out as if I was out of gas. When ...

...sensor 2007 chevy aveo http://www.aveoforum.com/forum/f94/how-change-oil-pressure-sending-unit-switch-16854/ I have a 2007 Suzuki frenza I'm trying to change my oil pressure sensor I can't locate ...

...//vivian.smugmug.com/Cars/car-repair/i-Lngm2PK/0/L/IMG1192-L.jpg how to change gmc 2005 Oil Pressure Sensor The two links should provide information on location of the oil sending unit. Hope this ...

...change u just need a special tool for removed on front of motor at right of oil filter its look like a coolant sensor or a little bottle with a connetor removed the connector and take the tool to ...

...change the oil pressure sensor on 2007 Avalance On both the V6 and V8 engines the Oil Sensor is located on top of the engine at the rear. You will need to remove the top of the intake manifold to get ...

Chevy silverado 2500 Oil pressure reads 0 at idle...changed oil pressure unit but that didn't fix it. need new oil pressure sensor

...pressure reading comes from the oil pressure sending unit near the dist. housing. you had to remove the dist. when changing the intake so maybe the sensor or it's connection are loose. good luck ...