1991 Chevrolet Lumina "install fuel pump" Questions

Fuel Pump Bad. I have a 92 Chevy Lumina 3.1 V6 Sedan. The fuel pump is bad and I need to know the steps to take to replace it. I am pretty handy but I have never replaced one. remove fuel tank from ...

...FUEL PUMP AND FUEL FILTER INSTALLED ON MY 95 CHEVY LUMINA AND WERE SURE THAT ITS NOT GETTING POWER BACK TO THE FUEL PUMP, COULD SOMEONE HELP ME FIGURE OUT WHAT ELECTRICAL SOURCE IS BROKE AND WHERE IS ...

...fuel from the tank.With the correct size socket wrench, remove mounting bolts. Then, remove the pump from the engine.Clean the old gasket material from the engine block.Apply gasket sealer to the ...

...you are listening for taking in consideration your listening to a pump motor inside a fuel tank submerged in gas.Next step is installing fuel pressure gauge and running diagnostic for

...fuel pressure and return line, trhe pump assembly is held into the tank by a twist out retainer ring, reverse to install pump and tank back into the car, this is a 2 person job on the ground, be ...

...fuel pump ok will try.if you've sprayed the starting fluid into it,does the engine run as long as you are giving it the fluid? if so,you may have a bad fuel pump relay,open main fuse box under hood. ...

...fuel pump booster to up the amperage getting to the pump to fix a issue like this, i would try replacing the fuel filter and run real good fuel system cleaner through it first. there are other things ...

...fuel pump andit was pumping just fine I had it put back in put the tank back up and tried to crank it again & everything turns like before but it didnt start. I had the spark plugs replaced again ...

...fuel line. Install a new fuel pump strainer on the outer edge of the ferrule until fully seated. The strainer must be facing the same direction as it was before removal. Position a new O-ring on the ...

...fuel pump it has messed the communication up if you havent already i would suggest unplugging your battery for thirty minutes im thinking your battery did not get uplugged during installation causing ...