1991 Chevrolet Corsica "change high beam switch chevy" Questions

...high beams only. I want to know where I need to put the fuse in the fuse box to get low beams as well. Need copy of wiring schematic for 1991 chevy corsica all signal lights on front and back blink ...

...high beams low beams are on... please help. Thank you! just take it to an electrician who would look after the switches and reverse them again so it came back to normal otherwise open the light ...

...high beam works and the low beam doesn't even go on.Can you give me an idea what the problem is. dimmer switch has gone bad need to change your dimmerswitch This is normal. That's how they come from ...

my high beam and all other lights work except the low beams. i have check all the fuses and changed both bulbs check voltage at switch broken wire in the tilt column that goes up to the dimmer switch

...high beam. Now because your signal lights are not working,it could be the multi-function switch. Any repair shop will quickly diagnose this problem. If you know how to change the headlight bulb of ...

...high-beam today. I Installed them but got no change. Any thoughts? Please help and thank you! It could be a ground problem, or the dimmer switch. I would check for power and ground at the lights with ...

...change to high beam! I changed the lights bulbs and checked all fuses but there is nothing wrong with them! As I heard from a electrician, its somehow related to a switch but I dont know where this ...

...doing it. 95 chevy k1500 4x4. they go out about 20 min after being on lowbeam and high beam. then they come back on in about 10 seconds hey can u chang the ligth or do u have to buy a new ...

...beam lights randomly work. I have to drive with my high beams on. we have changed the bulbs, the relay. sometimes the low beams come on in the morning then when the dome lights go off, so do they if ...

...beam gose out when switching to the high beams.all 4 should be on when on the high side. can someone help, please. normally the low beams go out when changed over to high beams check the relays or ...