...battery terminal 2. Loosen serpentine belt by rotating the tensioner and remove from alternator pulley 3. Unplug the alternator connections. 4. Unbolt the alternator. 5. replacement is reverse of ...
Question about Chevrolet Cavalier
battery is new though, the car still drives perfectly fine, its starts and stops, no lights are dim, when i had a friend look at it, he unplugged a wire connected to the altinator then plugged it back
...battery. and what ever you do, do not unplug anything from the computer because if its still has power it will FRY!! But the other option is the computer which you have to make sure to remove every ...
Question about Chevrolet Cavalier
...unplug the battery to remove the rear axle assembly ? What are the torque settings for all the bolts that attach the rear axle assembly ? What are the torque settings for the bolts that attach the ...
...battery unplug connector from fan motor remove bolts holding fan shroud to radiator pull assembly up to dislodge the holding tabs then guide the assembly out from the car make sure all wiring is ...
...unplug fan, take two wires and poke one end on the pos side, and attach to pos battery side, and poke the ground on in the other side attach to ground on battery.. if fan works, ur problem is else ...
...intake tube which contains some sensor. I did this so I could see better. Well, I left that sensor unplugged and now I have a check engine light. I tried disconecting the battery, but that didnt ...
Question about Chevrolet Cavalier
...battery. This may be too great of a taste for a beginner and may need an tech to do the work, but you can relay this information forward to whomever does the testing. Keep in mind that while ...
Question about Chevrolet Cavalier
...battery to disable power to SRS, then you can unplug air bag safely. If weather is cold, ground yourself to the chassis/frame to neutralize any static charge as you unplug the connector to the airbag ...
Question about Chevrolet Cavalier
...functions work have to disc. battery to save battery drainage Yes it has to be a problem with the switch remove covers and unplug the wires and see if they go off then, something is feeding
472 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions
