1991 Chevrolet Caprice "knocking noise until belt" Questions

...knocking noise when I crank it if auto , check the flex plate at the torque converter for cracks check ring gear for burrs possible big end bearing possible piston or broken ring test by removing a ...

...when cold then goes away when worm how can fix it DUH, what kind of noise ? belt slipping, knock, tap, squeeling ? Might be valves or lifters leaking down and making noise until they fill back

...knocking noise on 2000 A6. It was running fine until I took it in to have the serpentine belt replaced because of age. I have just under 89, 000 miles. The car is not losing power, but obviouly the ...

knocking or pinging noise at idle pinging is at idle and goes away around 2000 rpms.sound like the noise is coming from the timing belt area.i had a friend that is a mechanic at toyota come look at it

...noise until it warms up. Does the clutch make a noise when you depress the pedal? That's the thrust bearing .. the bearing that operates the clutch. I don't think you have too much to worry about. If ...

...knocking and screeching noise. The smaller belt is loose and bounces. Is it the power steering pump? Yes. That belt has to be very tight. If it looks worn or stretched it needs to be replaced. Adjust ...

...knocking noise and lost power, did I lose my timing belt? I have a 2002 Chrysler 300M with a 3.5 engine If it still runs, your timing belt is not loose, but it may have skipped a tooth (it happens). ...

...noise when turning right at slow speeds in my 04 forester. Turned out to be the rear seat belt knocking against the door... Subaru regreased and oiled everything for me trying to find the problem ...

...knocking noise, that dies down as the car warms up. The chirping noise is probably a worn beltYou should check all pulleys and belt tensioner for alignment and or loosenessThe knocking noise could be ...

...knocking is coming from the side of the engine where the serpentine belt runs. It never had any kind of unusual engine noise before. Can you help?? Hi, this could be because the cam timing is a notch ...