1990 Chevrolet S-10 Blazer "bolts" Questions

.I bought a new idler pulley,when I took my old one off I could not get the bolt out. Should I have gotten a bolt and washer with the new one? no you reuse the old bolt and washer unless there to far ...

...in the center working in an expanding square pattern crossing over the manifold on the first 2 bolts. tighten in 3 steps. these are low torque fasteners, don't over tighten & use locktite.

I am putting my 1998 Chevy 305 intake back together and my bolts got mixed up. I have all OEM bolts is there some kind of reference to use to ensure I get them all in the right place? Including the ...

the fan and clutch assembly from the fan's pulley. The assembly attaches to the pulley with several bolts on the circumference of the pulley. To remove the bolts, position an open-end wrench over each

the bolts that hold the starter in are brokrn off how do I fix it? Can you get on the broken bolt with vicegrips? If not you will have to file it flat then use a pointed punch exactly in the center to

...1991 s10 blazer bellhousing 15 mm? but need all info The heads are actually 9/16, the bell housing bolts are standard, not metric. All the other bolts are

whats the torque on a cylinder head ? First pass All bolts 30 Nm (22 ft. lbs.) . Final pass Long bolts (1, 4, 5, 8, and 9) in sequence to 75° . Medium bolts (12 and 13) in sequence to 65° . ...

rear gas tank strap bolt spin's but doesn't come out. Bad news!  Either threads are stripped, or where bolt screws in, the nut that is sometimes spot welded to hold bolt has come loose ...

...Chevy Blazer, & the power steering pump has to be replaced. The problem I have is one of the bolts needed to remove it has rounded off, & I've tried a special tool to remove it w/o ...

how would i remove rounded flexplate bolts They make special sockets for that problem at a local parts store..If Trans is still mounted to engine it will be a major task..You can remove TRANS with ...