1990 Chevrolet S-10 Blazer "1993 s10 need know" Questions

...1993 s10 blazer tahoe with 4.3L v6 Vortec. I have an LT1 from a 1994 Buick Roadmaster lying in my garage. i don't want to take the engine out of the s10 before i know if the LT1 will fit. I have all ...

...1993 4x4 S10 Blazer with automatic transmission and manual shift transfer case. The owners manual says it is flat towable but does not provide specifications as to speed. I know some flat towables ...

...1993 s10 blazer. i have a 1993 s10 blazer, just put new window motors in and they still dont work. but i check the black wire on the switch which should be ground and when i push the switch to lower ...

...1993 s10 blazer have an in tank fuel pump i have a 1993 s-10 blazer it will turn over but wont start i had a friend tell me its probobly the fuel pump and i dont know where it is located on the truck ...

...need to know how to look up the spider webbing, which is what everyone calls it but is not listed as that, in my 93 chevy s10 blazer 4x4 in the fuel injection, thx some call the ''SPIDER' but what it ...

...s10 blazer fuel pump replacement Ok, but how large does the actual hole need to be and what is the exact location? try yhe pickup coil or ignition module wich are both located on the distributor or ...

1993 Chevy S10 Blazer engine hesitation with smoke from exhaust My 1993 Chevy S10 Blazer 4wd 4dr. 4.3 liter vortec SUV took a dump last month and I've been trouble shooting it since, my smog and reg. ...

...s10 blazers digital cluster that fail to light up is there replacable bulbs for them? no you have to replace the whole cluster The best route for this is a mail in replacement. they run about $140 at ...

...S10 to a reputable/trusted mechanic and have him perform the following tests. Compression Test Leak Down Test Coolant System Pressure Test Inspect Oil for Moisture (you can do this one, remove the ...

1993 chevorlet s10 truck 2.8 5sp. small starter wires,from harness to solenoid.need to know witch wires go where.is the wires differant sizes? mine have been spliced. Wires to the solenoid are ...