1990 Chevrolet Corvette "bled brakes pedal soft" Questions

Ad

Question about Chevrolet Corvette

1 Answer

...brakes have been bled 5 times and on a lift, in the air, we cannot find any leaks. Each time, after bleeding, the break pedal is niceand not soft. But after driving and using them for a couple hours ...

Ad

Question about Chevrolet Corvette

1 Answer

...is turned off and restarted the brake pedal comes back to like it is suppose to be.. probably a vacuum leak in a hose or the canister itself, you have bled all air out of system at each wheel

Ad

Question about Chevrolet Corvette

1 Answer

bled or master-cylinder is BAD. Noise in rear can be alot of different things NOT related to Soft pedal for example bent backing plate,wheel bearing etc. I would recommend removing brake drum and take

...brakes has all new parts the master cyl must be filled and bled before install.after installing new bled master cyl,bleed all calipers.once you are sure there is no air left in system then you will ...

...bled air from that side, brakes were soft in the pedal. checked right rear for any air had none. brakes still feel soft inthe pedal and the brake light is staying on. do not drive the vehicle. remove ...

Bled brakes but peddle still goes to floor when running. Why? Master cylinder is toast. If you have bled all 4 brakes thoroughly, from furthest away to closest, and pedal still goes straight to floor,

...brakes starting at the farthest wheel from the resevoir, and finishing at the closest one. Try the pedal after its bled. If the pedal still feels soft or travels to the floor there may be a pinhole ...

...Have bled all the brakes and found no air in the lines and fluid is 1998 Pontiac Sunfire 4 cylinder Manual ABS the leather inside master cylinder is leaking. Buy a kit or a rebuilt from parts

...sits 1/2 below brake sensor so brake lights stay on. How do I fix? I replaced brake boost and bled the brakes. Bleed all wheels .farthest one first . rebleed lines and check flex lines for ...

Question about Chevrolet Corvette

1 Answer

bled furtherest rear to front. I am ready only brake fluid and air bubbles. Yet my brake pedal feels soft maybe sponggy? Engine running or off my pedal is not solid enough? Can you share what might be

Not finding what you are looking for?
1990 Chevrolet Corvette Logo

267 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...