1990 Chevrolet Camaro "change ignition lock cylinder" Questions

ignition One way is to change out the chip from the cars computer. Another way is use a General Motors GM VATS Override Bypass Kit, I'v learned that there is a pre-packaged set of resistors for the 15

...ignition switch, the motor doesn't even turn over. any ideas? ecu needs to read that chip... you are talking about the lock cylinder i hope, if you installed a new lock cylinder hope it had a long ...

...change the ignition switch on 89 camaro? im not talking about the cylinder lock....only the switch. I have not change the switch on a Camaro, but I have changed them on other vehicles, such as a 1985 ...

...ignition lock cylinder, thinking it was the same problem as I had before. The battery is also brand new. Any suggestions would be great. Anti-theft system problem . You changed the ignition lock ...

...ignition lock cylinder, however the ignition switch is mounted to the column and does not require the wheel to be removed. A locksmith would have rekeyed the lock cylinder. The high beam switch is ...

...ignition lock cylinder. Rather than repair the lock cylinder so the security system can read the pellet in the key, the previous owner "bypassed" the lock cylinder using the key that was taped to the ...

...change your VATS module Contact a local Locksmith. There is probably a broken wire to your Ignition Lock Cylinder. The cylinder should be replaced not repaired. Repairs do not last as the wires are ...

...ignition lock cylinder is bad and you will need a replacement. the key has a resistor pellet and the wires that come out of the lock cylinder, break, very common. I'm not saying that what your ...

...change the ignition cylinder on my 1992 chevrolet camaro need to have the tool to compress the steering wheel lock plate and steering wheel and then it is not bad to do. you can get them on rental ...

...ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each ...