1987 Chevrolet Monte Carlo "distributor" Questions

how to remove distributor on 1984 monte carlo 305 v8 replacing pick up coil bring engine to top dead center #1 with the timing marks. remove distributer cap and note position of rotor direction and ...

what would cause my 84 monte carlo 305 only fire on 4 cylinder Bad distributor cap. Bad distributor cam bad wiring to sparkplugs for starters. Bad pick up coil in distributor or worn shaft. The wires ...

how do i remove distributor cap from my monte how do i open distributor cap from my monte carlo V6 4.3. I need to replace the ignition module in there...... There will be either 2 clips or 2 screws ...

...quit firing at all I pulled a plug when i got home and it was getting absolutely no fire. Check the distributor and the distributor cap, check that there is no oil inside distributor rotor and that ...

not getting spark and the distributor and cap are fine. the rotor turns but no spark. there is something plugged into the side of the distributor but I don't know what it is. Check all fuses. ...

distributor rotation Engine firing order and distributor rotation V8 Here's a diagram with the firing order listed on top. Best of luck. Greg ...

...you turn ya car off and it kinda keeps jerking to stay on? This is a timing issue. if you turn your distributor cap a few degrees left or right (loosen the tension bolt first) you can nip this one in ...

...plug spark i am not sure but is there suppose to be a wire from an outside source to connect to the distributor cap Thanks Yes it comes from the coil. On the coil there is a battery side and a ...

...electronic ignition on a 350 chevy engine and need to know where the number 1 plug wire is on the distributor cap never seen one in my life so i cannot help with where the location is but what i ...

...have tried new coil. any answers? yes , what ewiz says... coil needs triggered..old school with distributor ...new with crank angle sensors and other info to the computer Is it a DLS ...