2002 Chevrolet Silverado 2500HD "leaking coolant" Questions

Radiator hose leak and anit-freeze types I recently replaced my radiator in my 2500HD (2002) after the trans cooling lines began to leak. Now I have since noticed a small leak around my lower radiator

2002 2500hd 6.6 duramax diesel is blowing smoke and has loss of power. Is this the injectors or piston rings? Bulletin No.: 03-06-02-005B Date: November 18, 2004 TECHNICAL Subject: Engine Coolant Loss

Low Coolant Level light stays on. Added coolant. Light's still on. Coolant's NOT leaking out anywhere. Whay does light stay on? Your sensor for the coolant level is bad. It happens hope this helps

My 2001 Duramax is using coolant. There are no My 2001 Duramax is using coolant. There are no apparent leaks. Greater usage when lauling heavy loads. Any ideas where to look and what to do? Thanks, ...

...leaking you will find evidence of coolant in the oil. When there is a blown head gasket, or burnt valve/s engine performance will be noticeably poor. The first and simplest test should be compression ...

Low Coolant Level remains on my 2002 Chevy Durmax 2500HD Diesel. Added coolant. There's no leaks. The light's still on. Why? possible clean sensor on tank or replace. its probably just one of those ...

...board,coming from ac (not coolant)already uncloged from out side and still leaking inside for this issue you have to remove the dash to get to the leak it is a broken hose.coming off the ...

...operation to dry the air. if you are leaking pure water out of it it is normal. if oil is leaking out of it the evaperator core has leak. if coolant is leaking out of it the heater core is

i have a check engine light on with a P0101 MAF sensor code and it appears to be using coolant. its a 2003 chevrolet silverado with the 5.3L V8. im thinking it might be the intake gasket? what is the ...

...mile i changed fuel filter / oil etc. but still has white smoke upon xcelleration after 1 mile it stops are you loosing coolant, posible injector sleeves leaking coolant into cylinders after shut ...