1998 Volkswagen Beetle "1600" Questions

I need torque settings for 1600 beetle engine SP Please, I need torque settings for 1600 beetle engine ie. crank case , big ends,cyl/heads front belt crank pully bolt and flywheel bolt thank you wiki ...

...can it be upgraded to a more modern one and then have hoses deleted? How can I tell if it is a 1600, a short or long block, or what type of engine it has? 1973 should be a 1600 if someone didn't ...

Need TQ specs for rocker arms on 1976 VW 1600 I just need the TQ specs for the rocker arms i just cant find them anywhere online. i was hoping someone could help me out. thanks. 14 - 18 ft. lbs.

i hav rebuild my 1600 vw enigne installed to vehicle and attmpted carrying out ignition timming, crank but no fire?!?! please help chek all your wiring connections check for spark at plugs you could ...

point and plug gap for 1973 beetle point and plug gap spec 1973 beetle If 1600 cc, plugs, .024, and points, .016. dwell- 44-50

fuel pump on a 1600 duel port has upper and lower ports what port does the line from the fuel tank connect to? The top port!

how to install oil temp sending unit where does the oil temp sending unit go on 1600 vw motor it should be on the side of the motor right above the oil pan possible that it is right next to filter

Vw 1600 cc engine need the points gap 28 thou.last time i looked

...CAN GET HOLD OF 1 OFF A LATER MODEL EG 1303 it should be from a simular sized engine eg 1500 use a 1600 or 1200 use ...

i have a 1972 1600cc vw do you have a picc of the wire diagram on the fireing order The firing order for 1972 VW 1600 cc is: 1 - 4 - 3 - 2 . See the wire diagram on the firing order in the picture ...