Remove the engine mount strut bolts. Swing the engine mount struts aside. Install the Engine Tilt Strap J-41131. Pull on the engine in order to rotate the engine forward. Tighten the strap. Remove the
...the engine torque mount - closest to front of engine. I have to replace the exhaust gasket . I removed 3 bolts- still not moving. if u r sure all bols are out ,rock engine back and forth and
...remove or install the engine. Do not pry or lean against the cruise control cable and do not kink the cable. A damaged cable must be replaced. The accelerator control cable from the engine (discard) ...
Remove both upper engine mounts, They make a special tool for this but its a little expensive so I just use a ratchet strap. Hook one end to the engine and the other to something solid on the front of
Can transmission be removed without dropping engine? You don't state model or make, but generally, yes you can remove the transmission only but will have to support the engine somehow.
...REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY WHEEL HOLES TO KEEP ENGINE FROM TURNING WHEN YOU LOOSEN THE HARMONIC BALANCE BOLT. ALSO SCREW DRIVER ...
...lifting eye and to the cross brace over the radiator to rotate the engine. Then remove the ignition coil pack to access the back plugs. You'll probably need a universal and an extension. Good
...remove anything that is in the way to make room I just changed alt on 2000 montana, loosen front engine mounts rock engine forward, and remove intake plenum. there actually is room to remove it
...removed before I can get to the oil pan. I can't see how to remove this part. Or can the oil pan be removed without removing the engine? thanks sorry but most of the time you have to life up on ...
781 questions posted
Usually answered in minutes!
830 Questions
613 Questions
518 Questions
458 Questions
361 Questions