...pin now pull the light foward to disengage the ball and socket attachment at the rear of the ...
...of hours when replace with new bulb..whats causing this Make sure the headlamp assembly does not have water in it.This will cause them to blow.If there is water in it you should replace it.Good
assembly back into the lamp housing. Be careful not to damage the bulb on the headlamp aiming bar. Same guide is here in the manual along with pictures. http://www.extendedgmwarranty.com/owners-manual
...Headlamp Light Bulb Size: 9004 Parking Light Bulb Size: 4157NALL Front Turn Signal Light Bulb Size: 4157NALL Rear Turn Signal Light Bulb Size: 3156 Tail Light Bulb Size: 3057 Stop Light Bulb Size: ...
...headlamp assembly from the headlamp panel. Remove the rear access cover from the headlamp assembly. Disconnect the headlamp connector. Remove the bulb from the headlamp assembly by rotating the bulb ...
headlamp assembly from the headlamp panel. Disconnect the headlamp leveling electrical connector from the motor/actuator if equipped. Disconnect the headlamp electrical connector (2) from the headlamp
...headlamp assembly from the headlamp panel. Remove the rear access cover from the headlamp assembly. Disconnect the headlamp connector. Remove the bulb from the headlamp assembly by rotating the bulb ...
headlamp assembly from the headlamp panel. Disconnect the headlamp leveling electrical connector from the motor/actuator if equipped. Disconnect the headlamp electrical connector (2) from the headlamp
...headlamp assembly to the upper tie bar. Gently pull the upper fascia and grille assembly forward only far enough to remove the bolt located at the bottom inboard side of the headlamp assembly. Pull ...
...headlamp assembly lower retaining bolt.Remove the radiator grille.Vehicles built up to 07/1999 Remove the headlamp assembly. Disconnect the headlamp assembly electrical connector.Vehicles built ...
781 questions posted
Usually answered in minutes!
830 Questions
613 Questions
518 Questions
458 Questions
361 Questions