2002 Pontiac Sunfire "need drivers side exterior front" Questions

side window of a 2005 Sunfire I have already purchased the regulator. We removed the panel from the door and were able to hook up the regulator to make sure that's all we needed and the window worked.

need to intall new front exterior drivers side door handle on a 2002 Hyundai Elantra GLS Need to learn how to install new exterior drivers side front door handle on a 2002 Hyundai Elantra GLS remove ...

...need to replce the drivers side mirror. Just seeking instructions on how to. Remove front door handle bezel screw cover Remove inside handle bezel screw Remove inside handle bezel Lift upward on the ...

...side window? How do I remove and replace this motor if it is bad? I can't get the inside door frame off because I can't figure out how to disconnect the linkages for the door latch handles (interior ...

side front which happens to be the only exterior lock on the entire vehicle. I also have a dead battery so the power locks won't work. Can't unlock the doors to get under the hood to replace or charge

...need to check the ACC relay for any moisture and replace. Then open drivers side door and look at water Chanel coming off driver door. Is there holes in the front side panel? Water comes off the rail ...

...side, hold the broken handle in place and must be removed ( DON'T loose them ). Loosen the rod from the clip at the top to allow a bit more room, But take note on the way it is attached ( you will ...

...Exterior Features -Body side molding -Front and rear body color bumpers -Driver and passenger power heated black door mirrors -External dimensions: overall length (mm): 4,803, overall width (mm): ...

...side. can i use the back door handle to replace the front one? also basic instructions on how to go about getting the handle off. i dont want to break anything trying to figure it out. This iis very ...

...need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to ...