2002 Pontiac Bonneville "remove rusted bolt rear shock" Questions

Ad

...remove bottom bolts- air line from shhock take bolt off bottom so jack is holding it on 4 take two bolts from top in trunk 5 slowly lower the control arm jack and the shock will come off-- you can ...

Ad

...You'll need to remove the 2 bolts that go thru the top of the shock and body. Then unbolt the lower shock thru bolt and remove. You might want to use some WD-40 to help loosen the rust on the

Ad

Question about Pontiac Bonneville

1 Answer

...rear shocks use larger bolts. I would jack the vehicle and spray the backside of the lower bolts with WD-40 or similar a day before attempting to remove the bolts. Broken bolts are a pain, this one ...

Question about Pontiac Bonneville

1 Answer

remove the 21mm lower shock bolt and the 18mm top shock bolt and release the jack,then remove shock and reinstall new,,,they are easy do the same fo rthe other side and then go to the front,,,take off

...remove the whole assembly required taking out one 14mm bolt at the bottom and three 12mm bolts at the top, some WD 40, several pieces of wood for leverage and a heavy mallet.. Since there is a heavy ...

...remove the rear seat back rest. These bolts do not seem rusted or damaged but both are STUCK like I've never seen before. Absolutely no movement using proper tools as well as a bolt loosening spray. ...

Question about Pontiac Bonneville

2 Answers

...remove bolt front and back that about it i guest the worst its lifting the truck high be carefull safety first hope it help fixya our post thanks pierre why are you replacing the springs? If you are ...

...remove the shocks it self without removing the wheel, it's your preference. Good luck and keep me posted, be glad to answer any questions you may have.  Replaced air shocks on my 2000 Silhouette ...

rear brake drum stuck on my 2005 Ford Focus zx4 st - I have tried using a hammer, prybar, lube, and adjuster, i have tried everything but a torch (that frightens me) I don't have a man around to do ...

Question about Pontiac Bonneville

4 Answers

...bolt(s) push against the hub. Make sure the wheel turns and adjuster backed off . If you can see a Countersunk screw in the face of the hub remove it. If hitting it fails , usually you can see two ...

Not finding what you are looking for?
2002 Pontiac Bonneville Logo

565 questions posted

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...