Size is " 36 or 34 mm #3 Tie Rod End Remove #4 LOWER BALL JOINT Nut and Seperate it, Using a BENT TIPED PRY BAR Pop Axel < This Step Sometimes Requires Some Finess and Manipulation but It WILL COME
lower ball joint stud, spray on more penatrating oil where stud goes through spindle, hit the spindle with a good size hammer where the ball joint stud goes through the spindle (always
Question about Pontiac Grand Prix
...lower ball joints, outer tie rod ends need nut sizes in mm's it depends on if they have been changed before. normal size is 18mm changed is 19mm on tie rods. also check the condition of the anti-roll ...
size 1986 For Lower & Upper Ball Joint Step by Step : For That you use a C-clamp style ball joint press to remove the ball joint from the suspension arm-note the location of the receiver cup ! For
Question about Pontiac Grand Prix
...size is the lower ball joint castle but on my 2000 dodge stratus Sorry I can't answer your question directly but it is worth noting the sizes of nuts and bolt heads exposed to the weather or extreme ...
...size. Engine mount torque settings (K-Series) Nm RH engine mounting bracket to engine RH engine mounting bracket to rubber mounting RH engine rubber mounting to chassis RH engine steady arm bolts LH ...
...lower control arm bushings be replaced at the same time. The vehicles handling may become unstable if there are new bushings on one side of the car and worn ones on the other. Set up the control arm ...
lower ball joints on a 1993 Pontiac Trans Sport? get your self a good size mallet. and a ball joint separation.. advance auto has them.. there cheap just ask for a pickle fork.. take off the wheel and
Question about Pontiac Grand Prix
...and nuts on upper control arm? Either 18 MM or 21 MM. If they look the same size as the lower control arm bolts. They are 18 MM. Rarely are upper arms changed. Upper ball joints are fairly
size nut or bigger not sure exact sizesecond have to remove the nut on the lower ball joint n seperate the lower control arm and strut. will need a ball joint fork which you can get at any parts store
1,045 questions posted
Usually answered in minutes!
1,496 Questions
1,236 Questions
1,211 Questions
1,043 Questions
1,014 Questions