2000 Pontiac Montana "obd2 port fuse" Questions

pins. Check the OBD2 port for broken wires or maybe a pin that got pushed out of the terminal block. Check the fuses, see if any of them are blown. I hope this helps. I will try this thank you so much

...OBD2 port in your 1997 Ram 1500, you can follow these steps: 1. Start by connecting a diagnostic scanner or code reader to the OBD2 port. 2. Once connected, ensure that the ignition is turned on ...

...obd2 port wont work is there any fuse i can change my car is a mercury cougar 99 Fuse no. 28(30amp) in interior fuse panel you are need to look in the port itself sometimes the pins get bent or what ...

obd2 port not working 1999 toyota sienna check engine light on, starts flashing, engine starts misfiring, then stops misfiring, runs good, engine check light goes off, obd2 port not working, fuses ...

...OBD2 port, the obd port some time shares with other accessories/things like cigarette lighter. Check all fuses, the OBD will not work if fuse is blown. Don't think it is a fuse. I have a similar and ...

no power on obd2 port on 1997 skylark no power on obd2 port, do not find any blown fuses If the computer is working correctly, the problem is usually the cig lighter fuse.

...OBD2 port is located below the steering wheel, towards the right or left knee. It should have a cover over it saying "diagnostic" or "obd2" another location is under the hood, typically near a fuse ...

OBD2 port pin 16 has power
if the fuse blows to pin 16 , all readers die.

if not in USA, (different answer) dig?
3.2 liter, usa is horn
so says mitichels.
fuse EB2 (engine bay

no power obd2 connector where is the fuse for obd2 port for 98 olds aurora look inside vechicle interior fuse box should see PCM fuse. Behind and under dash on driver's side.

OBD2 port using a scan tool. OBD2 is USA invention that other countries copied, EOBD and JOBD tool. no country told at all. so no real easy answers ever. lacking that. all fuses good scan DLC port. to