1998 Pontiac Grand Prix "car blower motor relay clicking" Questions

...car and i heard a clicking noise from my blower motor, it then started to blow smoke out and i tried shutting the fan off but it stayed running, I replaced the blower motor but the fan still does not ...

...blower motor is seized if you here a click it is most likely the relay. you can remove the lower panel on the passenger side and tap on the blower motor with the key and the blower switch on it may ...

...Blower Motor Control Processor) has malfunctioned... or the HVAC Control Module has failed. Both provide power to the blower motor. To check which one has failed - pull the HVAC control fuse ...

...Relays in it. There is a Relay in this for the Windows. Replace this Relay. If that does not work it very well could be the Motor on the door Making the Noise and you will need to replace the

car has also a blower motor control processor which also could be at fault. I believe your best option would be to use a DVM to check for the presence of B+ supply to the fan motor while going through

blower motor resistor located under the dash in the passenger footwell area a short distance from the blower motor. It is held in with 2 bolts and I would recommend if you replace it that you have a 1

...car ran better so i replaced it. The blower motor first started cutting off for a few seconds and then back on. When the blower would cut off so would the rear window defogger and air conditioning ...

...blower motor has stopped working. I have replaced the blower motor and the resistor with brand new parts but the fan still does not work. When I turn the fan on the blower motor relay clicks but ...

blower motor Where is the fuse located for the blower motor(fan)? Turn on fan and only hear a click. Not sure if there is a fuse involved or the motor is shot. the fuse should be located in the fuse ...

...blower motor relay, probably . You have all speeds but high ? High speed has a direct path to the blower motor through a high blow relay . All other speeds go through the blower motor resistor ...