1995 Pontiac Bonneville "heating" Questions

1994 bonnville Pontica over heats in the heat of the day The car will slow down (pressure is bad before it over heats.) The car does this in the heat of the day. you probbally need to replace your ...

I have a 2000 Pontiac Bonneville SE and the cold/hot selector knob is not positioned right. To get max heat it has to be a little over 3/4 turned toward high heat. Turning it to Max (as far as it will

pontiac heated seats Heated seats will not stay on The heating element is bad.Check fuse first. it also has a module check whith test light going in see what comes out if nothing comes out unit is bad

heater control wont heat. AC and fan works fine When turn on the defrost Ac comes on as when turn on the mode AC comes on .Turn off AC and hit auto and raise temperature but no heat. Any ideas would ...

My engine light says..ENGINE RUNNING HOT A/C DISABLED..and I turned on the AUTO button to enable the ac but it continues to run hot what should I do? Resolve the overheating issue. You do NOT want to ...

I have a 1996 Pontiac Bonneville SE V-6. My heat and air stopped working. When I drive down the road it will blow when it is on certain settings like defrost. The relay is good and the a/c and heat ...

...one second and goes right back off, and the seat never heats up. Is this a switch problem or the heating element in the seat and how do I trouble shoot? Aso unsure how much I am getting into

...works when it wants too. SOMETIMES I can hit a bump, and the blower motor will kick on. The whole heating controls are digital, so i cant jimmy rig it. The 90 degree digital number FLASHES. I think ...

how to turn the heat on in my car its a 2000 how to turn the heat on in my car its a 2000 pointac bonnville so i can get some heat My 2000 Bville did this to me once. It turned out all it was was a ...

Car throws heat when first started, then turns cold After the car is warmed up, the heat works, then 20-30 seconds later the heat turns cold. I think it is a blend door accuator that is faulty, but I ...