...3800 series is in same time eg ; 1999 - 2003 all engine parts are same . This will tell you engine swap / versus computer will be OK. If you have PCM from 3800 motor then install it too . pcm talking ...
...3800 your 95 has a series 2 motor. the 93 has a series 1 motor. it would be better to find a series 2 motor to put in it. there are a lot of things you would have to change to use the 93. don't think ...
...3800 Series-II 3.8L engine (naturally aspirated). Thanks Timing belt routing diagrams for cars and trucks? Click the link below:--- ...
...series 2 3800 engines have a problem with the intake plenum- it is made with plastic and over time warps causing hard starts, poor idling and coolant loss; there is also a bypass hose that leads to ...
Question about Pontiac Bonneville
3800 Series II.The crankshaft position sensor is located on the passenger side of the engine,behind the crankshaft pulley for the accessory drive belt.(The reluctor that gives the sensor its signal is
...3800 Series II V6 and a 4T65E transmission. There is a solenoid in the transmission that is called a PCS or Pressure Control Solenoid. Its a common issue with those transmissions and when they start ...
3800 series into a 96 buick lesabre 3800 series II? will it work? No as it will not comunicate with the ecm resulting in poor engine performance. The 87 tranny is not electronically controlled and the
how do i need a timing chain in my `1996 buick riveria with the 3800 series 11 engine? How many miles are on it and what are the symptoms?
...sensor out on a 93 buick lesabre 3800 series 1 you may want to remove the throttle body from the plemum. the screws that attach the sensor often times strip out and you may have to drill them
where is oil pump located in the oil pan on the 3100 engines, behind the timing cover on the 3800 series 2.
708 questions posted
Usually answered in minutes!
547 Questions
481 Questions
432 Questions
391 Questions
329 Questions
